Water Bubbler
Replacement Cartridges
Water Coolers
Water Filters
Water Distillers

Benchtop Water Filters Replacement Cartridges

Hurry, we only have stocks left!

trust-badge

Replacement filter cartridges for Awesome Water Filters plumbed-in benchtop and countertop water filter systems. These standard 10" × 2.5" two-stage cartridges — a polyspun sediment filter paired with a speciality carbon block — are designed to maintain flow rate and filtration performance in Single, Twin, and Triple benchtop filter housings.

Select your cartridge combination from the dropdown menu above. Seven options are available, from basic sediment and carbon to speciality blocks designed to help reduce heavy metals, fluoride, or chloramine.

Which Cartridge Combination Do I Need?

Variant Best Suited For Price
5µm Sediment + 5µm Carbon Good-quality mains water; basic chlorine taste and odour improvement; high flow rate $50
1µm Sediment + 5µm Carbon Mains water with moderate sediment; finer particle capture with good flow $54
1µm Sediment + 0.5µm Carbon Improved sediment and particulate reduction; suitable for most Australian mains water $66
0.5µm Sediment + 0.5µm Carbon Finer two-stage filtration; mains water with higher turbidity or sediment $68
0.5µm Sediment + 0.5µm Metals Water supplies where heavy metal reduction is a priority [NEEDS VERIFICATION: confirm specific metals targeted and reduction data] $84
0.5µm Sediment + 0.5µm Fluoride Water supplies where fluoride reduction is a priority [NEEDS VERIFICATION: confirm fluoride reduction percentage from test data] $93
0.5µm Sediment + 0.5µm Chloramine Water treated with chloramine rather than chlorine — common in some Australian metropolitan areas $93

Not sure which variant suits your water supply? Contact our team — we can help you select the right combination.

About These Cartridges

Each pack includes one polyspun sediment cartridge and one speciality carbon block cartridge. The sediment stage is designed to help capture particles, dirt, rust, and sediment before water passes through the carbon block stage, which is designed to help reduce chlorine taste and odour, volatile organic compounds (VOCs), and — depending on the variant selected — heavy metals, fluoride, or chloramine.

Both cartridges measure approximately 10" × 2.5" (25cm × 7cm) and fit standard 10" × 2.5" filter housings.

Filter performance depends on source water quality, flow rate, filter age, and maintenance. See product documentation for verified contaminant reduction data.

Compatibility

These cartridges are designed for use with the following Awesome Water Filters plumbed-in countertop systems:

These cartridges fit any standard 10" × 2.5" filter housing. They are not compatible with the gravity-fed Awesome Water benchtop purifiers — those use the 8-Stage KDF Gravity Filter Cartridge.

Specifications

Cartridge size 10" × 2.5" (approx. 25cm × 7cm)
Pack contents 1× polyspun sediment cartridge + 1× carbon block cartridge
Sediment micron ratings 0.5µm, 1µm, or 5µm (see variant above)
Carbon block micron ratings 0.5µm or 5µm (see variant above)
Specialty block options Metals, Fluoride, Chloramine (depending on variant)
Compatible housing size Standard 10" × 2.5" filter housing
SKU [NEEDS VERIFICATION: no SKU found — add in Shopify admin]
Certifications [NEEDS VERIFICATION: NSF certification and WaterMark status require confirmation — see compliance note below]

When to Replace

Replace both cartridges every 6–12 months depending on your source water quality, household usage, and water pressure. Replace sooner if you notice reduced flow rate or a change in taste or odour. Always flush new cartridges with 2–3 litres of water before drinking.

Installation

These cartridges fit standard plumbed-in countertop and benchtop filter housings. Turn off the mains water supply before changing cartridges. Depressurise the housing using the pressure release button, then swap the old cartridges for the new ones and retighten the housing. Flush before use.

If you are installing a new filter housing for the first time, contact a licensed plumber to confirm your installation meets local plumbing requirements.

Shipping Information

Available for delivery Australia-wide. Cartridges are lightweight and packaged securely. Remote area surcharges may apply at checkout.

Warranty and Returns

Covered by Australian Consumer Law guarantees. For enquiries, contact our team.

Frequently Asked Questions

What's the difference between the sediment and carbon cartridges in each pack?

The sediment (polyspun) cartridge physically captures particles, rust, and dirt. The carbon block cartridge is designed to help reduce chlorine taste, odour, and other chemical compounds. Together they form a two-stage filtration system.

Which micron rating should I choose?

A lower micron rating captures finer particles but may reduce water flow rate. For most Australian mains water, 0.5µm or 1µm sediment paired with a 0.5µm carbon block provides good filtration performance. If flow rate is a concern, a 5µm option offers higher throughput.

Do these fit my gravity-fed Awesome Water purifier?

No — these are for plumbed-in countertop filter housings only. If you have a gravity-fed Awesome Water benchtop purifier (the large bottle-style unit), you need the 8-Stage KDF Gravity Filter Cartridge.

Are these NSF certified?

[NEEDS VERIFICATION: NSF certification status requires confirmation before claiming. Please check supplier documentation.]

Also Consider

Compliance note for Lee: The current description displays NSF, WaterMark, Water Quality, and Made-in-UK certification logos. Please verify: (1) which specific cartridge variants hold NSF certification (NSF 42 and/or NSF 53), (2) whether WaterMark applies to the housing or the cartridges themselves, (3) country of manufacture — vendor is listed as Awesome Water (Australia) Pty Ltd, not a UK manufacturer. Remove any logos that cannot be verified for the specific cartridges sold.

Benchtop Water Filters Re... $93.00