HiFlow 0.5 Micron Inline Water Filter Replacement Cartridge

HiFlow 0.5 Micron Inline Water Filter Replacement Cartridge  Features & Benefits

• The High Flow Complete Cartridge under your existing kitchen bench and uses your current tap!

•  This unit can be installed vertically or horizontally, so it won’t clutter up your cupboard. 

• High Flow Complete incorporates the most advanced Quad Action Filtration Technology. 

• Water passes through the 4 stage filtration process with no bypass.

• The Radial flow design ensures maximum contact time with contaminants for maximum efficiency.
• Filters down to 0.5 micron
• Great tasting, healthy water on tap
• Filters all the cold water for your water tap
• No need for a separate filter tap
• Quick-twist hygienic cartridge changes DIY
• Reduces streaking on glassware
• Quick and easy installation, ideal for stone bench tops. Mounts horizontally or vertically - no shelf cutouts required
• Sediment, dirt, rust and other particles filtered down to 0.5 micron including Giardia and Cryptosporidium cysts
• Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology
• Scale and lime deposits are inhibited reducing build-up in appliances.
• Lead reduction - a harmful heavy metal

Quick Action Filtration 

• The AB High Flow Complete cartridge incorporates the most advanced Quad ActionFiltration Technology. With 4 levels of filtration and a radial flow design,
• the AB High Flow Complete Filters out sediment, lead, rust and dirt down to 0.5 micron.
• Bad taste, odour, chlorine and other chemicals are absorbed by the carbon block technology leaving healthy, great tasting, clean, safe and pure water.

Longer Filter Life

The High Flow Complete incorporates long-life filter technology, so you can go longer between filter replacements.

High Flow Complete Filtration Technology

Specifications 

• Min/max flow: 0 - 8 litres per minute
• Min/max temperature :2 - 38°C
• Min/max pressure: 200 - 860 kPa
• Nominal micron rating: 0.5 micron
• Capacity: 37,500 litres
• Connection: ½” BSP [15 mm]

Space required:

• Vertical mounting:450 mm (H) x 215 mm (W)
• Horizontal mounting: 215 mm (H) x 450 mm (W) 

Filter to effectively reduce the sediment, chlorine, taste & odours.

• 99.30% of Lead at pH 6.5
• 99.90% of Lead at pH 8.5
• 94.50% of Mercury at pH 6.5
• 96.60% of Mercury at pH 8.5
• 97.60% of Partculates (Class 1) 
• 89.60% of Benzene
• 99.90% of P-Dichlorobenzene
• 99.99% of Cysts
• 98.70% of Carbofuran
• 97.00% of Chlorine
• 99.10% of Turbidity  

Reduces the following contaminants: 

• 2,4-Dichlorophenoxyacetic Acid (2,4-D)
• Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene
  
• Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5
  
• Particulates (Class I) 

Toxaphene 

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour.

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.