0

Your Cart is Empty

Portable RO Reverse Osmosis Water Filter System


Portable RO Reverse Osmosis Water Filter System Features:

  • This system is locally assembled by us in Queensland using high quality approved parts
  • Great portable RO unit + 99% Fluoride removal + 99.99% Bacteria filtration
  • This RO system is a multi-stage pumpless system.
  • It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.

This item is sent with a connector to fit 3/4" and 1/2" garden taps [measure 25mm and 20mm respectively] per 2nd listing image

We also supply these systems with sink mixer diverter valves to connect to the end of any standard* mixer tap with an aerator that you can unscrew

Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you`ll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won`t need to use the thread converter

Easy to carry around and great for caravanning, camping, and home use + produces +/- 190 litres per day depending on mains water pressure

3-stage filter unit with 1x granular carbon + sediment in line filter + 1x 50gpd nsf.org certified reverse osmosis membrane + 1x coconut carbon post filter

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 95% depending on environmental factors

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals

See the below table for effective reduction of common contaminants [increases to between 99.9%-100% if DI is selected as post filter]:

ELEMENT/COMPOUND

% REDUCTION

ELEMENT/COMPOUND

% REDUCTION

Barium

97%

Potassium

100%

Bicarbonate

100%

Radium

97%

Cadmium

97%

Selenium

97%

Calcium (Hardness)

99.90%

Silicate

99.00%

Chromate

95%

Silver

99%

Copper

97%

Sodium

98%

Detergents

97%

Strontium

97%

Fluoride

99%

Sulphate

100%

Lead

97%

PCB’s

97%

Magnesium

100%

Insecticides

97%

Nickel

97%

Herbicides

97%

 

All water contact parts are manufactured from high-quality food-grade plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association), or FDA (Food and Drug Administration) quality standard approvals. All plastics are manufactured to be BPA-free.

RO System Includes:

  • 1x inline NSF certified inline sediment + carbon pre-filter
  • 1x NSF certified 50GPD reverse osmosis RO membrane
  • 1x coconut carbon post membrane final stage polishing filter
  • 3x meters of high pressure 1/4" | 6mm water filter tube
  • Tap connector/s to fit both 1/2" and 3/4" garden taps

This RO unit carries a full 24-month warranty on all parts supplied in the original order, this is subject to our standard terms and conditions listed in our operating manual.